The built-in Battery Management System (BMS) protects your battery from Over Charge and Discharge, Over Current, Short Circuiting, as well as Low and High Temperature for increased performance and longer life. The BMS will automatically cut off the battery and the voltage will drop below 1V.
Only when the circuit is cut off, the battery will automatically reactivate after 1 second(No longer need a higher voltage input to activate). The LiFePO4 battery weighting only 12.65 lbs for one module, it's weighs only 1/3 the weight of lead acid batteries. LiFePO4 battery is 50% lighter than lead acid battery with the same capacity.
Rated Capacity: 50 Ah 2. Nominal Voltage: 12.8V 3.
Continuous Output Power: 640W 6. Continuous Charge Current: 50A 7. Cont Discharge Current: 50A 8. Charging Voltage: 14.4V14.6V 9. Storage Temperature Range: 5°F122°F 11.
Solar Panel + Charge Controller? 7.68 x 6.42 x 6.61 inch. Weight: 12.65 lbs 14. Number of Series and Parallel Connection: 4P4S. This 14.6V 10A LiFePO4 battery charger is uniquely designed for 12V LiFePO4 battery, it enables more than 90% high charging efficiency for lithium iron phosphate battery charging.It maximizes optimizes the lithium battery performance, and extends the battery lifetime to a large extent. The single-channel voltage is up to 14.6V, with a maximum current of 10A. It can charge a 12V 50Ah LiFePO4 battery to 50% in 2.5 hours, 2 times faster than an ordinary 5A battery charger.
The battery charger with a LED indicator is easier to monitor the battery charging status. The durable shell and cooling fan allow the charger's exterior to function as a heat sink with over-heating protection. This is a dedicated charger for 12v (12.8v) LiFePO4 lithium battery and cannot be used to charge lead-acid batteries. Disconnect the power supply before connecting or disconnecting the battery charger from the battery. The anode of the charger is connected to the anode of the LiFePO4 battery, and the cathode of the charger is connected to the cathode of the LiFePO4 battery.
The red charging clip is anode(+) and the black charging clip is cathode(-). Output: DC 14.6V, 10Amps Input: AC 100V240V 2.0A, MAX 5060Hz Out Connection: High Current Alligator Clip Couplers Compatible Battery: For 12V LiFePO4 Battery 30Ah-200Ah Material: Plastic Size: (L x W x H) 160 x 75 x 45 mm Weight: 375g. 1X 12V 50Ah LiFePO4 Battery. 1X LiFePO4 Battery Charger 1X User Manual.
Keep in a dry environment. Keep ventilation when charging, strictly forbid to cover, forbid to be near flammable gas.
Connect the battery correctly, reverse the positive and negative terminals will burn the internal fuse. Please use a 12V lithium iron phosphate battery charger to charge to avoid danger. We are not responsible for wrong or undeliverable address.It is our goal to provide our customer 100% satisfaction. We have always been trying our best to provide the best service and reliable products for every customer.