12V 50Ah Trolling Motor LiFePO4 Lithium Iron Phosphate Battery Rechargeable BMS

  

If you're looking for deep cycle batteries for RVs, campers, caravans, golf carts, cabin, or marine use, Off-Grid Applications, or other 12V appliances, then our ultra-portable Lifepo4 batteries will be perfect for you! Ultra-Light Weight: about 12.78 lbs, only 1/3 weight of normal lead-acid battery; The integrated smart battery management system (BMS) not only protects this Digi Marker LiFePO4 battery from various abnormal conditions but monitors and manages the charging/discharging process.

The state-of-the-art battery cells ensure a long cycle life and exceptional discharge performance. What you get is a longer, consistent and more drawn out charge all the time. Performance Redefined: Digi Marker LiFePO4 Battery, powering your devices with unmatched effectiveness!

About our Digi Marker Battery. Lithium-Iron Phosphate Battery provides off-the-grid power supply for. 4WD vehicles, caravans, campers, trailers, motor-homes, marine applications, and all 12V appliances including portable fridges and washers. The Lifepo4 battery features an incredible cycle life of up to 4000 cycles, making it one of the most enduring in its class.

The integrated smart battery management system (BMS). Not only protects this LiFePO4 battery from various abnormal conditions but monitors and manages the charging/discharging process. The maintenance-free deep cycle battery is completely sealed.

Spill-proof and does not leak gas for added safety and durable use. Lithium-Iron Phosphate battery is smaller and generally weights less than. Half of what comparable lead acid battery does. Less stress during installation, and less strain on wherever you end up installing it. Invest in this sealed, maintenance-free battery for your off-grid system today! The unique built-in battery management system (BMS) of our products lithium battery can protect it from overcharge.

Deep discharge, overload, overheating and short circuit, and low self-discharge rate. Our BMS has a high temperature disconnect function. When the internal temperature of the battery reaches 75?

(167°F) it will automatically disconnect to protect the battery. With overcharge and over discharge protection functions, when the overcharge voltage exceeds 15V or the over discharge voltage is lower than 8.8V. The battery will automatically disconnect. Our recommended charging voltage and discharging voltage are 14.6±0.2V and 10v±0.2V. If the charging voltage is lower than 13.8V, the battery power (with a deviation of 1-2°/o) cannot be fully charged. HOW TO ACTIVE THE BATTERY. If the battery cannot be charged and the voltage is too low this is the time to activate. If the BMS has cut-off the battery for protection, you need to cut off the load of the battery and put the battery aside for 30mins.

Then the battery will automatically recover itself to normal voltage and can be used after fully charged. If the battery is unable to recover itself and its voltage is too low to hold a charge, you can activate it in below ways.

Use the charger with 0V charging function(it can charge the battery starting from 0V) to charge the battery. After fully charged, the battery can be used normally. Use another 12V lithium battery to connect in parallel with the battery for a minute to activate the battery. (lead-acid battery with voltage more than/equal to 12V and less than/equal to 14.6V will also work). After that, fully charge the battery and it can be used normally.

Use an 18V solar panel to directly charge the battery so that the current does not need to pass through the controller and the BMS can be activated. You also can use a 12V solar panel to activate the battery's BMS, it takes about 3 seconds to fully activate.

WHY CHOOSE DIGI MARKER BATTERY OVER OTHERS? Highly recognition and popularity in the United States Higher energy intensity lighter weight compared with AGM or lead-acid battery 100% real capacity, each has been factory inspected. ARE DIGI MARKER BATTERIES SAFE? All the Digi Marker Lifepo4 batteries are made of non-toxic material and dont give off dangerous or hazardous fumes. Which makes itsafe for you and the environment too.

Additionaour batteries are with the built-in Battery Management system (BMS). The BMS can protect thbatteries from overcharge, over-discharge, over-current.

And short circuits with excellent self-discharge rates, with built-in high-tempcut-off prevents charging over 158. ARE DIGI MARKER BATTERIES WATERPROOF? All of our Digi Marker LiFePO4 battery has an IP65 protection class, which sets you free from worrying to install it indoors or outdoors. But when charging or discharging the battery, please be careful not to let the post bolts or terminals come into contact with water, as this may damage the battery. CAN DIGI MARKER BATTERIES BE USED AS A STARTING POWER SOURCE? No, as our batteries are not designed for starting, we don't recommend using these batteries for starting. It may damage the batteries in long-term use if used as a starting power source. IS MY DEVICE COMPATIBLE WITH YOUR BATTERIES?

Digi Marker battery can serve most of the normal devices if use the battery correctly under the instructions of the manual. Please check the manual of your device and see if it is capable with our batteries.

As long as the continuous charging and discharging current and power of our battery can meet the power of the equipment you need to use. If you're not sure, please feel free to chat with us(Please provide the power and current of the device you need to load). CAN DIGI MARKER BATTERIES REPLACE MY LEAD-ACID BATTERIES? Digi Marker LiFePO4 battery is considered the perfect replacement battery for the AGM battery. The LiFePO4 battery will become the majority used in the future as it has superior performance compared with other AGM batteries.

You can use it to replace your lead-acid batteries and start to enjoy a free & fruitful life. But you need to pay attention to the power and current of your load equipment is within the output range of the battery.

Because the Lifepo4 battery features a built-in BMS safety protection system, more than the output power of the device will cut off power to protect the battery. When used correctly following the product manual instructions.

Please read the product manual carefully before installing and using the product, and use the battery correctly under the instructions of the manual. 12V 50Ah LiFePO4 Battery Pack 1. Please be noted: battery charger is not included.