3A Fast Charger:Save charging time. XT90 Plugs-Male female connection--used for discharge. 3 Pin Charger Plug-Connect charger--used for charge. BMS with high-performance dual-processors provides short circuit, over charging and over-temperature protection while maintaining a balanced voltage across all cells. The battery cell is A 123 polymer soft pack.
There are 16s cells in the 48v 20ah LiFePO4 battery. The simpler the structure, the more stable the battery pack performance, the lower the failure rate and the safer. Chemicals are more stable and less prone to explosion under severe impact, safer than the 18650 cell. High cell density, More capacity and longer life.
Two thin wires are used to charging, connect to the black charging plug. Two thick wires are used to Discharging, connect to XT90 plug. Another XT90 plug need be connected to controller. Red is positive pole; Black is negative pole. Don't connect them by mistake, otherwise it will destroy battery. Please let us know if the charger is damaged during transportation or not working, and we will resend it. Our battery accessories are separated separately. XT90 plugs and 3-hole plug are not connected to the battery. You can configure corresponding plugs according to different plugs of these controllers. It's the safest Lithium battery type. LiFePO4 batteries will not explode or catch fire, lithium iron phosphate has better thermal and structural stability. Longer cycle life than other batteries. Can reach over 2,000 times life cycle. Compared to similarly sized lead acid batteries. The maximum voltage of lithium iron phosphate at full charge is 3.65v. After the battery is fully charged and powered off, it is normal for the voltage to fall back to 3.35v or above.If the static state drops to 3.32 or below, it indicates severe battery loss. Voltage issues of concern to buyers. After the 48V LiFePO4 Battery is fully charged, the voltage will drop within a few seconds. As long as the voltage detected by the battery at full charge is between 53.6v and 58.4v, the battery will have no problem.
48V 20AH LiFePO4 Battery with 3A Fast Charger, 40A BMS Fit for 48V 52V Controller 250W-2000W Motor Electric Bike Scooter. How to determine whether the battery is suitable for your device? Voltage of your controller: 48V/52V. Whether the battery size(8.75.95.9 inches) is suitable for your battery case.
48V LiFePO4 Battery=52V LiFePO4 Battery, because all connections are: 16S1P. 48V 20AH LiFePO4 Battery=52V 20AH LiFePO4 Battery. So 48V LiFePO4 Battery can be applied to 48V or 52V controllers. It depends on the voltage of motor and controller.
36V motor and controller, choose 36v battery. 48V motor and controller, choose 48v battery. 52V motor and controller, choose 52v battery. 60V motor and controller, choose 60v battery. 72V motor and controller, choose 72v battery. BtrPower batteries are widely used. Electric scooter/Electric motorcycle/Electric golf cart/Electric tricycle/Electric bicycles, etc.Replace your 4 12V battery to reduce weight. Let's Upgrade Your Device!! We are committed to providing high-quality products and good shopping experience! Good communication can better solve problems. Contact the after-sales staff of the store.
Package is damaged due to logistics/Package has not arrived/Battery does not work/Battery size is not appropriate/Charger is broken, etc. Provide photos and send them to us, and we will reissue them.
Battery questions/don't know how to use it/Battery is often powered off, etc. Tell us, we will provide professional knowledge for your question and reply within 8 hours.