PFCTART lithium iron batteries have exceptional quality since they are manufactured by Automotive Grade LiFePO4 Cells with higher energy density, more stable performance & greater power. Highest-level safety based on UL Testing Certificate for the cell inside the battery.
This makes li-iron batteries perfect for solar home, RV, campers, motor homes, off-grid applications. PFCTART LiFePO4 battery provides 5000+ cycles, which is more than 10 times to Lead Acid with 300600 cycles. PFCTART LiFePO4 battery has a 10-year service life, three times longer than the Lead Acid's 3-year lifetime. PFCTART LiFePO4 battery's flat discharge curve holds above 12.8V for up to 95%, of its capacity usage, providing astronomical boosts in run-time compared to only 50% in Lead Acid. This product is your best choice for outdoor camping power and indoor easy installation.
PFCTART LiFePO4 Battery weighs only 8.81 lbs for one module, only 1/3 the weight of lead acid batteries, which makes it an easy choice for RVs, Marine and Off-Grid Applications when mounting or mobility is in the consideration. PFCTART LiFePO4 battery has built-in BMS (Battery Management System) to protect it from overcharge, over-discharge, over-current, and short circuit with excellent self-discharge rate. Built-in high-temp cut off prevents charging over 167 °F (75 °C).Without memory effect, no matter what state the battery is, it can be used as soon as it is charged. PFCTART LiFePO4 battery is IP65 level waterproof, which set you free from worrying to install indoors or outdoors. MODEL: 30Ah 12.8V(4S5P). Discharge termination voltage: 10.0V. Single cell: IFR 32700 3.2V 6000mAh. Cut-off current: 0.01 C. Standard discharge: Constant current 0.2C5A end voltage 10.0V. Maximum discharge continuous current: 30A.
Cell overcharge detection voltage:3.90V±50mV. Cell overcharge recovery voltage:3.80V±100mV. Cell over-discharge detection voltage:2.00V±100mV. Cell over-discharge recovery voltage:2.50V±100mV.
Rated operational charge current:30A. It does not have series/parallel protocol, please do not use it for multiple series or parallel installations.