With 4 Grade A LiFePO4 Cells in series instead of 8 in the regular version, Redodo 12V 200Ah battery has 230Ah usable capacity, with a longer-lasting power and more stable performance beyond your expectation. The new version Redodo 12V 200Ah pro battery has higher energy density with the advantages of 1/3 lightweight and 3 times usable energy that of a lead-acid battery and highest-level safety based on UL certificates for the cells. Excellent 100A BMS for Longer Cycle Life. New version Redodo 12V 200Ah LiFePO4 battery has a built-in exceptional quality 100A BMS, which supports 100A max. Continuous charge/discharge current, 1280W max.
Load power and 2.944kWh max. Energy, and can protect the battery from over-charging, over-discharging, over-current, over-temperature and short-circuit. Redodo LiFePO4 battery can be recycled up to 3000 times with 10 years of service life. Redodo 12V 200Ah LiFePO4 batteries with more battery capacity than the regular version, supporting battery expansion for up to 4 series & 4 parallel. Flexible operating in both series and parallel connections.
It also supports massive 47.104kWh energy storage via 4P4S connection. Redodo 12V 200Ah battery is ideal for off-grid systems and all kinds of outdoors applications, such as home backup power, RV, camper van, solar system, etc. Redodo 12V 200Ah LiFePO4 battery supports recharging by solar panel, LiFePo4 DEDICATED battery charger with DC14.2V-14.6V and electric generator (recommend to add a DC-DC charger). With any questions, please do not hesitate to let us know and we will make out all our efforts to serve every customer. Redodo 12V 200Ah LiFePO4 battery is suggested to work with a 70100 lbs thrust trolling motor.
Besides, this battery is NOT suitable for starter batteries or golf cart batteries, for more info please consult Redodo freely. This battery can not be connected with Zooms 12V 200Ah (regular version) or Redodo 12V 200Ah (regular version) in series or in parallel. Connecting 1612.8V 200Ah LiFePO4 batteries in 4P4S to build a 51.2V 800Ah Battery System. 400A continous charge/discharge current, Max.
20.48kW load powe and Max. Can I connect Redodo batteries with AGM batteries? We do not suggest you connect Redodo lithium iron phosphate (LiFePO4) batteries with AGM batteries, as they are two different types of batteries and their charging and discharging are very different. All of our Redodo LiFePO4 battery has an IP65 protection class, which sets you free from worrying to install it indoors or outdoors. But when charging or discharging the battery, please be careful not to let the post bolts or terminals come into contact with water, as this may damage the battery.
How to activate BMS when the battery is dead? General Steps If the BMS has cut off the battery for protection, follow the below steps to activate it.
Step 1: Cut off all the connections from the battery. Step 2: Leave the battery aside for 30mins. Then the battery will automatically recover itself to normal voltage (10V) and can be used after fully charged.
If the battery is unable to recover itself after the above steps. Please try activating by one of below two methods. After activated (voltage10V) and fully charged by the normal charging method, it can be used normally. Method Use a charger with a 0V charging function to fully charge the battery. Method Connect an 18V-36V solar panel directly to charge the battery without a controller for 1030mins in sunny daytime. What is the 12V/24V battery voltage of a fully charged battery? The battery capacity could be roughly estimated by its voltage. As there are subtle differences in the voltage of each battery, the below parameters are for reference only. The voltage needs to be tested at rest (with zero current) after 30 mins of disconnecting from the charger & loads. This item is in the category "Consumer Electronics\Multipurpose Batteries & Power\Rechargeable Batteries".The seller is "redodopower" and is located in this country: US. This item can be shipped to United States.
Load Power: 1280 W